Cleaning
Agents For Spot Removal
Detergent
Solution
Mix one teaspoon
of clear dish washing liquid or detergent powder
(containing no bleaches or strong alkalies) with a
cup of warm (not hot) water. This solution must be
well rinsed with clear water. WoolClean Spot Remover
#1 is part of the WoolClean Spot Removal Kit.*
Absorbent
Cleaners Host®, Capture®, or
Dri-Matic®
Ammonia
Solution
Mix one tablespoon clear ammonia (3% solution) with
one half cup water. This solution must be
neutralized with vinegar solution.
Warnings
Some chemicals
are hazardous (corrosive, flammable, toxic, etc.)
and should be used with great care, strictly in
accordance with their use and safety instructions.
DO NOT
apply solvent-containing products or Dry Spot
Remover #2 to bonded carpets (carpets that are not
tufted or woven, but where the pile is bonded to the
backing). When applying Dry Spot Remover #2 or other
solvent-containing products, have the work area well
ventilated.
DO NOT
apply stain repellent treatments which contain any
silicone because they tend to accelerate carpet
soiling. (Some carpet manufacturers do not accept
responsibility for complaints where such treatments
have been used.)
Always pre-test a
cleaning agent in an inconspicuous place, such as
under a piece of furniture or in the corner of the
room, to insure that it does not remove color.
